CONSUMER-Grade Formulations of Our Product can be purchased below. for HIGH PERFORMANCE applications, please CONTACT US.

Ice-Lite 1111 Coating

Consumer-grade version of coating, available in both clear and black. Please inquire for different color options.
$ 89.99 USD
Application notes/instructions
  • Prepare surface before applying. Ensure surface is clean and dry. Certain surfaces may require additional pre-treatment like sanding or priming. It is advisable to test an inconspicuous area first to determine if the desire look is achieved and if adhesion between the coating and the surface is satisfactory.
  • Protect surfaces that are not to be coated from drips/accidental exposure to the coating. It is very difficult to remove the coating once cured.
  • Apply thin single coats; apply additional coats to achieve desired thickness. For best results, a brush or roller appropriate for the surface being coated should be used. It should be applied when the temperature is between 50 °F and 100 °F. Avoid applying in direct sunlight or to hot surfaces. It is recommended that you thoroughly shake the can prior to application to ensure mixing of ingredients within the can. Initial cure takes approximately 4 hours; full cure takes 24 hours. Refrain from touching the freshly-coated surface during initial cure. Additional time may be needed in cooler temperatures and/or lower humidity. Additional coats should be applied within 4 hours of each other.
  • Clean up brushes/rollers and any other tools used using paint thinner or other organic solvents. In case of accidental application of the coating to other surfaces, immediately clean off using a solvent. Water will NOT clean off the coating.
  • The coating covers approximately 75-90 sq. ft. per quart (300-350 sq. ft. per gallon).
Shipping and return policies

Orders will be shipped within 5 business days. If there are longer shipping times, a member of our team will reach out to let you know. We only allowed orders on our website that are shipping to the continental U.S. or Canada. If you wish to place an order for another region, please contact us directly.

We do not accept returns of our products. If you are unsatisfied in any way, please reach out and we will work with you, either issuing a refund, sending a new or different version of the product, or guiding you through the application process to ensure the product is being correctly applied.

Copyright Elemental Coatings 2021 | All rights reserved